(0)
£0.00 Ex.Vat
British Sterling
Paslode 2.8mm x 51mm IM350 Ring Shank Galv Plus Nails 3,300 - 3 x Fuel Cells

Paslode 2.8mm x 51mm IM350 Ring Shank Galv Plus Nails 3,300 - 3 x Fuel Cells

Code: PAS141204
  • Offers Available
  • Free UK Delivery when you spend £75.00
  • Free UK Mainland Delivery when you spend £75.00
  • Free UK Delivery when you spend £75.00
Now £81.67 Ex.Vat
RRP: £104.70 Ex.Vat Was £90.52 Ex.Vat You Save: £23.03 Ex.Vat (22%)
£98.00 Inc.Vat Inc.Vat
Item in Stock|   Usually dispatched within 24 hours
Add to Bag
This product has been added to your basket...
  • Continue Shopping
  • Checkout

Paslode IM350+ Diamond point clipped head Nail packs with paper strip, supplied with Paslode Special Impulse gas fuel cells. FINISH: All Paslode nails are Chrome 6, cadmium and lead free and are available in five finishes to meet corrosion requirements. Bright: Economy and bright nails meet the Eurocode 5 requirements for applications in service class 1 (indoor) Specification - No coating. Galv Plus : Meet the Eurocode 5 requirements for applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn / Al alloy approx 15µm. Electro Galv : Meet the Eurocode 5 requirements for all applications in service class 1 and 2 (indoor and covered outdoor) Specification - Zn and chromate minimum 7µm. Hot Dipped Galv : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - Zinc coating minimum 50µm Stainless Steel : Meet the Eurocode 5 requirements for all applications in service class 1, 2 and 3 (indoor, covered outdoor and outdoor) Specification - A2 according to AISI 304, and A4 according to AISI 316. SHANK: Smooth Shank: The standard nail, offering high shear value and lowest withdrawal resistance. Fixing across the grain. Fixing into end grain. Clenching applications. Specification - Number of centres will vary with shank diameter. Unilock Shank : Increases withdrawal resistance. Drives easier than ring shank fixing across the grain. Specification - The ringed parts have 24 rings per inch. Ring Shank : Provides the highest withdrawal resistance. Fixing across the grain. Specification - RPI (Rings Per Inch) vary from 16 to 32 depending on Specification. HEAD TYPES : Round Head : The head area is designed to maximise resistance to the head being pulled through Specification - Head size between 2.0 and 2.5 times wire diameter according to EC5 Clipped Head : Increases number of nails per strip. The head area is designed to maximise resistance to the head being pulled through Specification - Head area corresponding to full round head area, according to EC5

0 x 0 x 0

We aim to supply all products marked “in Stock” over £25 on a one to two working day basis provided the order is placed by 3.00pm. Free Two Day Delivery on orders over £75.00 including vat to UK Mainland. Under £75.00, a carriage charge of £5.95 will be charged dependent on weight.

No deliveries will be made on Bank Holidays.

Please note all orders placed after 3pm on a Friday will not be dispatched until Monday

Christmas deliveries orders placed on the 22nd should be delivered on or before the 24th but can not be guarenteed. orders placed on or after the 24th will be delivered on or after the 30th December. Orders placed the 30th will be delivered on or after the 4th January.

Deliveries will be made by either APC or Ukmail

Please note there maybe extra charges to the follow postcodes KW,IV, AB, PH, PS, DD, BT, HS, PA.

Please also allow extra delivery time for these areas as there not next day guaranteed.

Hopefully you won’t need to return an item of your order, if you do, we’re here to help. Firstly let us know. E-mail sales@ciponline.co.uk, Telephone 01623 622439, Fax 01623 420134. Please have your invoice number to hand so we can deal with your request.